1. Magnetic detection activation:
Activating the device and the sensor to activate the magnetometer will switch to magnetometer mode. This feature is available in metals or allows us to understand vacuum resistance with acoustic sound. The higher the field resistance, the louder the sound signal. It’s a potential metal target. If the acoustic sound cuts off with increasing volume, it probably represents a void.
2. Automatic transfer to PC:
4 to 26 meters in this mode, you can measure up to the depth.
Mode of operation: I put into action. Press the Menu 2 (arrow) key to select the mode, while you will be connected to the computer once approved (by compression) will appear on the device screen. This procedure
continues for a few seconds. Then the start button. You will be interrogated. A beep sounds. If prices are measured. When transferred to a computer, a representative graph will be created automatically.
Green, largely symbolizes normal ground. It also has red and blue objects in this graph. Usually metal objects are shown in red, water deposits and rods are shown in blue. Soil minerals appear in red. But metals are represented by geometric shapes, minerals look larger and amorphous.
3. Manual analysis on the computer
This mode is similar to the auto scan function with PC functions but the measured values are not transferred directly to the computer and will be stored in the internal memory of the device.
When you have finished the measurement, you can select all the data with the 5. Menu option. It is possible to transfer (The transfer to a computer).
4. MANUAL MEMORY SCAN
This mode is similar to the automatic scan on the computer, but instead of transferring the measured values directly to the computer, it will be stored in its internal memory. In addition, each manual tap (measuring value memory) must be activated manually. All data after you finish your measurement. You can transfer to a computer with the (Transfer to Computer) option.
5. CLEAR MEMORY
There is an option to clear the memory of any scan you have performed to be ready for your next scan
6. TRANSFER TO COMPUTER
If you want to transfer all the scans held by memory, you can very easily transfer them to the tablet to keep track of your search, by selecting a button on your crawler. So you have to do the right steps from the crawler options so that the memory keeps them before transferring them to the computer. Only if the detector is ready for download will the software be measured correctly
Technical Specifications Proton Series:
Working temperature -20C to +40C
When not in use, it is exposed to direct sunlight from -40°C to +60°C.
Pulse converter width modulation rate 1953 kHz
Battery life 2-4 hours
Maximum charging time 3 hours
Maximum continuous power 850 mA
Voltage source 11.1v-14.2v
Frequency amplitude 433 mhz +/- khz
Maximum work in humidity -95
256m software screen colors
Screen refresh rate 0.2 sec
It’s not waterproof
Processor – Motorola 8mhz
Internal working memory – 16K 8 BIT EEPROM
Setup -100.100
Signal-to-digital configuration
Scan Center-1.3 A
Transmitters 2-7
Measurement range – + – 150Ut
Bandwidth – DC .. 1 kHz (-3 dB)
This device is designed for professional use.
Road works and cable duct detection
Burial and gold hoard industry.
Shelters for escape detection tunnels, intersections, eyelids
Construction sector, lack of detection of piping, acoustic grounding tests as in the detection of objects such as pipes, tubes, etc.
In municipal legal entities, in the detection of large-scale water leaks, in the detection of plastic and non-plastic pipes, illegal warehouse and oil station under the control of illegal warehouse.
PRODUCTS 2 YEAR WARRANTY
There are no reviews yet.