Neumann TLM 170 R mt STEREO SET


  • Manufacturer:Neumann
  • Model:TLM 170 R Stereo set
  • Series:TLM 170
  • Category:Large diaphragm condenser microphones

 

Neumann TLM 170 R mt STEREO SET

Microfono da studio a condensatore a diaframma largo – stereo set

The TLM 170 R* was the first microphone to use the successful fet 100 technology. Along with a balanced, transformerless output stage it features extremely low self-noise and an impressive dynamic range.


Specifiche Tecniche

Acoustical operating principle Pressure gradient transducer
Directional Pattern Omnidirectional, wide angle cardioid, cardioid, hypercardioid, figure-8
Frequency Range 20 Hz … 20 kHz
Sensitivity at 1 kHz into 1 kohm 8 mV/Pa ± 1 dB
Rated Impedance 50 ohms
Rated load impedance 1 kohms
Equivalent noise level, CCIR 1 26 dB
Equivalent noise level, A-weighted 2 14 dB-A
Maximum SPL for THD 0.5% 3 144 dB
Maximum SPL for THD 0.5% with preattenuation 4 154 dB
Signal-to-noise ratio, CCIR (re. 94 dB SPL) 5 68 dB
Signal-to-noise ratio, A-weighted (re. 94 dB SPL) 6 80 dB
Maximum output voltage 10 dBu
Supply voltage (P48, IEC 61938) 48 V ± 4 V
Current consumption (P48, IEC 61938) 3 mA
Matching connector XLR 3 F
Weight 625 g
Diameter 60 mm
Length 152 mm

 

1)according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
2)according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
3)measured as equivalent el. input signal
4)measured as equivalent el. input signal
5) according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
6) according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Whatsapp? Chat with us